Skip to content
Plumbing Advisors

Plumbing Service

Faucet and Sink Repair

A dripping faucet or leaking sink wastes water and can damage cabinets over time. Plumbing Advisors helps you understand the problem and connect with faucet and sink repair help.

Plumbing Advisors provides guidance and connection assistance. Independent providers perform the plumbing work and confirm availability, pricing, timing, and credentials.

On this pageOverview
Plumbing Advisors Editorial TeamEditorial StandardsSource-Checked

Quick summary

  • For dripping faucets, leaking sinks, and low pressure
  • Small drips add up on your water bill
  • Under-sink leaks can damage cabinets
  • Call to describe the issue and get connected

About faucet & sink repair

Faucet and sink repair covers the everyday fixtures you use the most: the kitchen and bathroom faucets, the supply valves and lines feeding them, the sink basin and its seals, and the drain assembly underneath. Most problems start small. A worn washer lets a faucet drip, a loosened compression fitting weeps a few drops a day, or mineral buildup chokes the flow at an aerator. Left alone, a slow drip wastes a surprising amount of water over a year, and a hidden under-sink leak can quietly warp a cabinet floor or feed mold.

The good news is that fixtures are one of the more approachable corners of home plumbing. Many issues come down to a few inexpensive internal parts, and the fix is straightforward for a professional once the cause is identified. The harder questions are usually whether a tired faucet is worth rebuilding or better replaced, and whether a leak is coming from the fixture itself or from the connections below. Plumbing Advisors is a national service that helps you sort out what you are dealing with and connects you with plumbing professionals who work in your area.

Signs you may need faucet and sink repair

A faucet drips when fully closed

A faucet that keeps dripping after you shut it off usually has a worn washer, O-ring, or cartridge inside. The parts are small, but the steady drip adds up on your water bill over time.

Moisture or pooling under the sink

Dampness in the cabinet, a musty smell, or water pooling on the base points to a leak at the supply connections, the drain, or a worn seal. Catching it early keeps the cabinet and floor from being damaged.

Weak pressure at one fixture

If flow is weak at a single faucet while the rest of the home is fine, the culprit is often a clogged aerator or a partly closed supply valve. Low pressure throughout the home points to a broader cause.

The handle is loose or stiff

A handle that wobbles, spins, or feels gritty to turn often means a worn cartridge or loose internal hardware. It tends to get worse with use and can lead to a drip.

Rust, corrosion, or stains at connections

Green or white crust on supply lines and fittings, or rust around the base of the faucet, signals aging connections that may be close to leaking. These are worth inspecting before they let go.

Sprayer or diverter not working

A pull-out sprayer that will not switch, leaks at the hose, or sticks in one mode usually has a failing diverter or a worn hose. It is a common wear item on kitchen faucets.

What to know

When you need it

  • A faucet drips even when fully closed
  • Water leaks under the sink or at connections
  • Water pressure is weak at a faucet
  • A fixture is loose or does not operate smoothly

Common causes

  • Worn washers, O-rings, or cartridges
  • Loose or corroded supply line connections
  • Mineral buildup in the aerator or valve
  • A failing faucet that has reached its lifespan
  • Damaged seals at the sink or drain

What to check first

  • Clean the faucet aerator to improve weak flow
  • Check the under-sink connections for moisture
  • Shut off the fixture supply valve if it is leaking
  • Note whether hot, cold, or both are affected

When to call a pro

  • A leak continues after basic checks
  • Under-sink connections are leaking or corroded
  • Low pressure persists at the fixture
  • You are replacing a faucet or sink

Repair vs. replace the faucet

When a faucet acts up, the choice is usually between swapping a worn part and putting in a new fixture. A professional can tell you which makes more sense for yours.

Repair it

If the faucet body is solid and the finish is in good shape, a repair is often the practical choice. Drips, stiff handles, and weak flow frequently trace back to a washer, O-ring, cartridge, or aerator that costs little to replace. This is the budget-friendly path for a faucet that is otherwise serving you well.

Replace it

Replacement starts to make sense when parts are hard to find, the finish is corroded or pitted, the faucet has failed more than once, or the base is leaking where it meets the sink. A newer fixture can also improve flow and reliability. If you were already planning to update the look, this is often the moment to do it.

What a typical faucet & sink repair visit includes

  • Inspecting the faucet, sink, supply valves, and drain connections
  • Identifying the source of the drip, leak, or pressure problem
  • Shutting off the fixture supply and relieving pressure before work
  • Replacing worn washers, O-rings, cartridges, or aerators
  • Resealing or reconnecting supply lines and the drain as needed
  • Installing a new faucet or sink when replacement is the better option
  • Testing for leaks and confirming proper hot and cold flow

What faucet & sink repair costs

A faucet & sink repair quote should be based on the inspected scope, access, parts or equipment, permits, restoration, and urgency. Compare written quotes that describe the same work.

Typical faucet & sink repair costs

ProjectTypical cost range
Leaky faucet repair$140–$360
Cartridge replacement$160–$400
Washer or O-ring replacement$110–$280
Bathroom sink faucet repair$140–$370
Sink drain / connection leak repair$135–$390

Service-call fees

ServiceTypical cost range
Diagnostic / service call$80–$200 per visit

Labor-only project costs

LaborTypical cost range
New faucet installation (labor)$145–$390

What affects the cost

  • Whether it is a quick washer or O-ring swap versus a full cartridge or valve job
  • Fixture type and quality (basic vs. high-end or specialty faucet)
  • Accessibility under the sink and condition of supply lines and shutoffs
  • Whether parts are still available for an older or discontinued faucet
  • After-hours or emergency visits, which carry higher rates
  • Regional labor rates

Typical service process

  1. 1Identify the leaking or malfunctioning fixture
  2. 2Shut off the fixture supply valve if it is leaking
  3. 3Connect with a plumbing professional that services your area
  4. 4Have the faucet, sink, and connections inspected
  5. 5Repair or replace worn parts or the fixture
  6. 6Test for leaks and confirm proper flow

How to choose the right pro

  • Confirm the professional is licensed and insured where your state requires it
  • Ask for a written estimate before work begins
  • Get the scope itemized so you can see parts versus labor
  • Ask whether they recommend repair or replacement and why
  • Check that the work and any new fixture carry a warranty
  • Read recent reviews and look for clear, straightforward communication

How Plumbing Advisors helps

Plumbing Advisors helps you tell whether a fixture needs a small part or a replacement, then connects you with plumbing professionals that service your area. Catching an under-sink leak early protects your cabinets and floor. Availability and pricing vary by location and provider.

Frequently asked questions

Why does my faucet keep dripping?

A persistent drip is usually a worn washer, O-ring, or cartridge inside the faucet. These parts wear out with use. Replacing them typically stops the drip.

What causes low water pressure at one faucet?

Low pressure at a single faucet is often a clogged aerator or a partially closed supply valve. If pressure is low throughout the home, the cause is usually broader. Our low water pressure guide has more.

Is an under-sink leak urgent?

It is worth addressing soon. Even a slow leak under a sink can damage the cabinet and floor and encourage mold. Catching it early keeps the repair simple.

Sources and further reading

These references support the safety and technical guidance on this page.

Choose your area

Faucet and Sink Repair near you

Find faucet and sink repair in your state or city. Availability varies by location and provider.

Faucet and Sink Repair by state

AlabamaAL6 cities
ArizonaAZ8 cities
ArkansasAR5 cities
CaliforniaCA9 cities
ColoradoCO8 cities
ConnecticutCT6 cities
DelawareDE5 cities
FloridaFL8 cities
GeorgiaGA8 cities
IdahoID5 cities
IllinoisIL9 cities
IndianaIN8 cities
IowaIA6 cities
KansasKS5 cities
KentuckyKY6 cities
LouisianaLA6 cities
MaineME5 cities
MarylandMD7 cities
MassachusettsMA8 cities
MichiganMI9 cities
MinnesotaMN7 cities
MississippiMS5 cities
MissouriMO8 cities
MontanaMT5 cities
NebraskaNE5 cities
NevadaNV6 cities
New HampshireNH5 cities
New JerseyNJ8 cities
New MexicoNM5 cities
New YorkNY10 cities
North CarolinaNC8 cities
North DakotaND5 cities
OhioOH9 cities
OklahomaOK5 cities
OregonOR6 cities
PennsylvaniaPA9 cities
Rhode IslandRI5 cities
South CarolinaSC6 cities
South DakotaSD5 cities
TennesseeTN7 cities
TexasTX10 cities
UtahUT6 cities
VermontVT5 cities
VirginiaVA8 cities
WashingtonWA8 cities
West VirginiaWV5 cities
WisconsinWI7 cities
WyomingWY5 cities

Need Plumbing Help Now?

Call Plumbing Advisors to connect with help for leaks, drains, water heaters, sewer lines, burst pipes, toilets, faucets, and more.

No-obligation request · Availability varies by location and provider

+1 (877) 493-0082Check Availability